Yealink W52P Configuration Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Contents

Yealink W52P Configuration Manual Manual pdf 40 page image

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE 20-BD5392-00©2013 YEALINK PAGE 40 OF 545.2.6 Configure Yealink W52P IP DECT PhoneThis section describes the steps necessary to configure the Yealink W52P to integratewith BroadWorks Device Management.Log in to the web user interface for the W52P IP DECT Phone (https://address>). Go to the Phone → Auto Provision web page and set the following: Check New Config – Power On URL – Device Management server (Xtended Services Platform) device address URLExample: http(s)://xsp1.broadworks.net:80/dms/Yealink_W52P/ HTTP Authentication:User Name – BroadWorks Device Access (Example: yealink)Password – BroadWorks Device Access Password (Example: 123456)Restart the phone to force the phone to download the Device Management configurationfiles and firmware.Example Login (Default User Name/Password is admin/admin):Figure 11 Login Screen