Yealink W52P Configuration Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Contents

Yealink W52P Configuration Manual Manual pdf 42 page image

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE 20-BD5392-00©2013 YEALINK PAGE 42 OF 54Appendix A: Sample W52P Configuration FilesNOTE: The following samples are examples and should be used as a reference only. DO NOT CUTAND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use theconfiguration files obtained from Yealink with the specific release to generate your configuration files.System Default File: y000000000025.cfgNOTE: This is an example file and should be used for reference only.#!version:1.0.0.1##File header "#!version:1.0.0.1" can not be edited or deleted.########################################################################### Network ##########################################################################Configure the username and password for PPPOE connection.#Require reboot;network.pppoe.user =network.pppoe.password =#Enable or disable the VLAN of WAN port; 0-Disabled(default), 1-Enabled;#Require reboot;network.vlan.internet_port_enable =#Configure the VLAN ID, it ranges from 1 to 4094, the default value is1.#Require reboot;network.vlan.internet_port_vid =#Configure the VLAN priority, it ranges from 0 (default) to 7.#Require reboot;network.vlan.internet_port_priority =#Configure the HTTP port (80 by default) and the HTTPS port (443 bydefault) of the web server. Both range from 1 to 65535.#Require reboot;network.port.http =network.port.https =#Configure the maximum local RTP port. It ranges from 0 to 65535, thedefault value is 12780.#Require reboot;network.port.max_rtpport =#Configure the minimum local RTP port. It ranges from 0 to 65535, thedefault value is 11780.#Require reboot;network.port.min_rtpport =#Configure the voice QOS. It ranges from 0 to 63, the default value is40.#Require reboot;