Administrator’s Guide for W60P/W53P/W41P DECT Phones144DescriptionIt configures the anonymous call on code.The IP phone will send the code to activate anonymous call feature on server-side when you activate it onthe IP phone.Example:account.1.anonymous_call_oncode = *72PermittedValues String within 32 charactersDefault BlankWeb UI Account->Basic->Send Anonymous Code->On CodeParameter account.X.anonymous_call_offcode[1] .cfgDescriptionIt configures the anonymous call off code.The IP phone will send the code to deactivate anonymous call feature on server-side when you deactivateit on the IP phone.Example:account.1.anonymous_call_offcode = *73PermittedValues String within 32 charactersDefault BlankWeb UI Account->Basic->Send Anonymous Code->Off Code[1]X is the account ID. X=1-8.Call Number FilterCall number filter feature allows IP phone to filter designated characters automatically when dialing.TopicCall Number Filter ConfigurationCall Number Filter ConfigurationThe following table lists the parameter you can use to configure call number filter.Parameter features.call_num_filter .cfgDescriptionIt configures the characters the IP phone filters when dialing.If the dialed number contains configured characters, the IP phone will automatically filter these char-acters when dialing.Example:features.call_num_filter = -If you dial 3-61, the IP phone will filter the character - and then dial out 361.Note: If it is left blank, the IP phone will not automatically filter any characters when dialing.Permitted Val-ues String within 99 characters
