Administrator’s Guide for W60P/W53P/W41P DECT Phones82Time Zone Time Zone Name Time Zone Time Zone Name+1 Macedonia(Skopje)+1 Netherlands(Amsterdam)+1 Namibia(Windhoek)NTP SettingsYou can set an NTP time server for the desired area as required. The NTP time server address can be offered by theDHCP server or configured manually.TopicNTP ConfigurationNTP ConfigurationThe following table lists the parameters you can use to configure the NTP.Parameter local_time.manual_ntp_srv_prior .cfgDescription It configures the priority for the IP phone to use the NTP server address offered by the DHCP server.PermittedValues0- High (use the NTP server address offered by the DHCP server preferentially)1- Low (use the NTP server address configured manually preferentially)DefaultValue 0Web UI Settings->Time&Date->NTP by DHCP PriorityParameter local_time.dhcp_time .cfgDescriptionIt enables or disables the IP phone to update time with the offset time offered by the DHCP server.Note: It is only available to offset from Greenwich Mean Time GMT 0.PermittedValues0-Disabled1-EnabledDefault 0Web UI Settings->Time&Date->DHCP TimeParameter local_time.ntp_server1 .cfgDescriptionIt configures the IP address or the domain name of the NTP server 1.The IP phone will obtain the current time and date from the NTP server 1.PermittedValues IP address or domain nameDefault cn.pool.ntp.orgWeb UI Settings->Time&Date->Primary ServerParameter local_time.ntp_server2 .cfgDescriptionIt configures the IP address or the domain name of the NTP server 2.If the NTP server 1 is not configured (configured by the parameter “local_time.ntp_server1”) or cannot beaccessed, the IP phone will request the time and date from the NTP server 2.
