Troubleshooting Methods243Permitted Values URL within 511 charactersDefault BlankExporting BIN Files from the PhoneProcedure1. From the web user interface, click Settings->Configuration.2. In the Export or Import Configuration block, click Export to open the file download window, and then save thefile to your local system.Importing BIN Files from the PhoneProcedure1. From the web user interface, click Settings->Configuration.2. In the Export or Import Configuration block, click Browse to locate a BIN configuration file from your local sys-tem.3. Click Import to import the configuration file.TopicBIN Files Import URL ConfigurationBIN Files Import URL ConfigurationThe following table lists the parameter you can use to configure the BIN files import URL.Parameter static.configuration.url[1] .cfgDescriptionIt configures the access URL for the custom configuration files.Note: The file format of the custom configuration file must be *.bin.Permitted Values URL within 511 charactersDefault BlankWeb UI Settings->Configuration->Export Import Config[1]If you change this parameter, the IP phone will reboot to make the change take effect.Exporting All the Diagnostic FilesYealink IP phones support three types of diagnostic files (including Pcap trace, log files (boot.log and sys.log) and BINconfiguration files) to help analyze your problem. You can export these files at a time and troubleshoot if necessary.The file format of the exported diagnostic file is *.tar.Procedure:1. From the web user interface, navigate to Settings->Configuration.2. Click Start in the Export All Diagnostic Files field to begin capturing signal traffic.The system log level will be automatically set to 6.
