Phone Provisioning59Default 1Web UI Settings->Auto Provision->DHCP ActiveParameter static.auto_provision.dhcp_option.list_user_options .cfgDescriptionIt configures the IPv4 custom DHCP option for requesting provisioning server address.Multiple options are separated by commas.Note: It works only if “static.auto_provision.dhcp_option.enable” is set to 1 (On).Permitted Val-ues Integer from 128 to 254Default BlankWeb UI Settings->Auto Provision->IPv4 Custom Option(128~254)Parameter static.auto_provision.url_wildcard.pn .cfgDescriptionIt configures the characters to replace the wildcard $PN in the received URL of the provisioningserver.Note: The configured characters must be in accordance with the actual directory name of the pro-visioning server.Permitted Val-ues String within 32 charactersDefault W60BStatic Provision ConfigurationTo use the static provision method, you need to obtain the provisioning server address first when configuring a pro-visioning server.The provisioning server address can be IP address, domain name or URL. If a user name and password are specified aspart of the provisioning server address, for example, http://user:pwd@server/dir, they will be used only if the serversupports them.NoteA URL should contain forward slashes instead of back slashes and should not contain spaces. Escape characters are not sup-ported.If a user name and password are not specified as part of the provisioning server address, the User Name and Passwordof the provisioning server configured on the phone will be used.The following table lists the parameters you can use to configure static provision.Parameter static.auto_provision.server.url .cfgDescription It configures the access URL of the provisioning server.Permitted Values URL within 511 charactersDefault BlankWeb UI Settings->Auto Provision->Server URLParameter static.auto_provision.server.username .cfg
