Administrator’s Guide for W60P/W53P/W41P DECT Phones92Default 1Web UI Settings->Call Display->Display Called Party InformationParameter phone_setting.call_info_display_method .cfgDescription It configures the call information display method when the IP phone receives an incoming call, dials anoutgoing call or is during an active call.PermittedValues0-Name+Number1-Number+Name2-Name3-Number4-Full Contact Info (display name)Default 0Web UI Settings->Call Display->Call Information Display MethodParameter account.X.update_ack_while_dialing[1] .cfgDescription It enables or disables the IP phone to update the display of call ID according to the ACK message.PermittedValues0-Disabled1-EnabledDefault 0Parameter sip.disp_incall_to_info[2] .cfgDescription It enables or disables the phone to display the identity contained in the To field of the INVITE messagewhen it receives an incoming call.PermittedValues0-Disabled1-EnabledDefault 0[2]If you change this parameter, the IP phone will reboot to make the change take effect.Display Method on DialingWhen the IP phone is on the pre-dialing or dialing screen, the account information will be displayed on the LCDscreen.Yealink IP phones support three display methods: Label, Display Name and User Name. You can customize the accountinformation to be displayed on the IP phone as required.TopicDisplay Method on Dialing ConfigurationDisplay Method on Dialing ConfigurationThe following table lists the parameters you can use to configure display method on dialing.Parameter features.caller_name_type_on_dialing .cfg
