Zanussi ZKG5530 User Manual

Contents

25PROBLEM POSSIBLE SOLUTIONThe flame colour is orange/yellow. Due to the design of the burner the flame canappear to be orange/yellow (flame disturbance) incertain areas of the burner this is a naturaloccurrence.The burner is not igniting or only partially lighting. Check that the burner is dry and that food spillageor cleaning fluids are not present on the burner.This can be dried with a cloth and stubborn markscleaned away with a dry nylon brush (oldtoothbrush etc.)The burner sounds noisy. It is natural for the burners to emit noise as thegas is being drawn through the burner and mayreduce as they heat up.The burner is emitting a popping sound. This is a natural occurrence when the burner isalight and does not affect the performance of theburner.Noise. It is normal for some metal parts on the cooker toproduce noise when in use, this is due toexpansion and contraction when heating up andcooling down.Technical dataDimensionsHeight: 900mm (nominal)Width: 550mm (nominal)Depth: 600mm (to front of door panel)Weight: 58KgSpace for fixing at hob level 2mm minimum clearance.Space for fixing above hob level See important note ‘Location of appliance’.Minimum space above hob level 650mm (If a cooker hood is fitted refer to thecookerhood installation instructions).Minimum distance from rear wall 5mm (spacer given by pressed spacer on ventpanel).ConnectionsGas connection Rear left hand side of appliance at hotplate level.Rc ½” (½” B.S.P. female)Electrical connection 230V-240V a.c. 50Hz mains 3-core cable andmoulded plug fuse to 3 amps.This appliance complies with: European Council Directives Low voltage Directive73/23/EEC, Gas Directive 90/396/EEC EMC Directive 89/336/EEC, CE Marking Directive93/68/EEC.