Zanussi ZOU364 User Manual

Contents

Shelf Support RailsRemoving the shelf support rails1 Pull the front of theshelf support rail awayfrom the side wall.122 Pull the rear shelf sup-port rail away from the sidewall and remove it.Installing the shelf support railsInstall the shelf support rails in opposite sequence.The rounded ends of the shelf support rails mustpoint to the front!Oven lampWarning! Be careful! There is the risk of electricalshock!Before you change the oven lamp:• Switch off the oven.• Remove the fuses in the fuse box or switch off the cir-cuit breaker.Put a cloth on the bottom of the oven for protectionof the oven light and glass cover.1. Turn the glass cover anti-clockwise to remove it.2. Clean the glass cover.3. Replace the oven light bulb with applicable 300°Cheat-resistant oven light bulb.Use the same oven lamp type.4. Install the glass cover.Cleaning the oven doorThe oven door has two panels of glass. You can removethe oven door and the internal panel of glass to clean it.The oven door can close if you try to remove the in-ternal panel of glass before you remove the ovendoor.1 Open the door fully andhold the two door hinges.2 Lift and turn the leverson the two hinges.3 Close the oven door tothe first opening position(halfway). Then pull for-ward and remove the doorfrom its seat.4 Put the door on a softcloth on a stable surface.5 Release the lockingsystem to remove the inter-nal panel of glass.90°6 Turn the two fastenersby 90° and remove themfrom their seats.1 27 Carefully lift (step 1)and remove (step 2) thepanel of glass.25