Zeiss S88 Instructions For Use Manual

Also see for S88: Instructions for use Instructions for use Instructions for use

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0Printed on 28. 01. 2009Operation 107Configuration mode 1 for OPMI Vario (SETTINGS 1)Configuration mode 1 for the OPMI Vario permits you:– to assign a function to buttons C and D of the foot control panel,menu items "FOOT LEFT C:" and "FOOT RIGHT D:"– to assign a function to the freely configurable handgrip buttons, menuitem "HANDGRIP:"Assigning a function to foot control panel buttons C and D (OPMI Vario)Buttons C and D of the foot control panel can be configured as required.The menu items "FOOT LEFT C:" and "FOOT RIGHT D:" permit you toassign one of the following functions to buttons C and D:FOOT LEFT C:Use the upper display and key field (FOOT LEFT C:) to assign one of thepossible functions to button C of the foot control panel.FOOT RIGHT D:Use the middle display and key field (FOOT RIGHT D:) to assign one ofthe possible functions to button D of the foot control panel.Path: After you have switched on the instrument, the basic mode is auto-matically displayed.To access configuration mode 1 from the basic mode, simultane-ously press the "MODE" and "STORE" keys.Display Function of button C or D of the foot control panelXY-RES XY recentering ("RESET")FOC-MEMFocus memory pressed for < 2 sec:pressed for > 2 sec:triggers positioningsaves positionZOOM-MEMZoom memory pressed for < 2 sec:pressed for > 2 sec:triggers positioningsaves positionPHOTO Triggering an exposure via the camera interface, i.e. triggersthe shutter of a connected 35 mm camera.AUX Triggering an AUX signal via the AUX interface, e.g. toswitch an external instrument on or off (see remote controlsocket on the connector panel of the suspension system).AF Triggering the autofocus optionMODE STORE MANUALFOOTLEFT C:PHOTOFOOTRIGHT D:PHOTOHANDGRIP:LIGHTConfigurationmode 1SETTINGS 1C DMODE STORE MANUALFOOTLEFT C:PHOTOFOOTRIGHT D:PHOTOHANDGRIP:LIGHTConfigurationmode 1SETTINGS 1