Zeiss S88 Instructions For Use Manual

Also see for S88: Instructions for use Instructions for use Instructions for use

134 OperationG-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0Printed on 28. 01. 2009OPMI® PRO magis: assigning a function to keys C and D of the footcontrol panelKeys C and D of the foot control panel can be configured as required.In configuration mode 1, the upper and center display boxes enable youto allocate one of the following functions to keys C and D:FOOT LEFT C:Use the upper section of the display and key field (FOOT LEFT C:) to as-sign one of the possible functions to key C of the foot control panel.FOOT RIGHT D:Use the middle section of the display and key field (FOOT RIGHT D:) toassign one of the possible functions to key D of the foot control panel.SelectionAt each press of the "∇" or "Δ" key, the program jumps from one possibleconfiguration to another.Caution:Be extremely careful when changing these settings. You should changesettings only under your own user ID. Notify all users of any changes, ormake sure that each user only works under his own user ID.Saving parameter settingsAs soon as you have entered a parameter setting, it is saved under thecurrent user ID.Display Function of key C or D of the foot control panelPHOTO Triggering an exposure via the camera interface, i.e. trig-gering the shutter of a connected 35 mm camera.AUX Triggering an AUX signal via the AUX interface, e.g. toswitch an external instrument on or off (see remote controlsocket on the connector panel of the suspension system).Path: After you have switched on the instrument, the basic mode is auto-matically displayed.To access configuration mode 1 from the basic mode, simultane-ously press the "MODE" and "STORE" keys.Path: To return to the basic mode, press the "MODE" key in configurationmode 1 or do not press any key for 20 seconds.C DConfigurationmode 1MODE STORE MANUALFOOTLEFT C:PHOTOFOOTRIGHT D:PHOTO