Zenith H20H52DT Installation And Operating Manual

Page 33Installer MenusInstaller Menu Items 64-I through 90-IMenu Item Function Value Range Default Value Brief Description of Function and Comments64-I. FOR. PTL. M. 0 - 7 6 Custom foreground color for the V-Chip (Parental Con65-I. BCK. PTL. M. 0 - 7 4 Custom background color for the V-Chip (Parental Con66-I. NOT USED67-I. NOT USED68-I. NOT USED69-I. EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Channel-Tim70-I. FOR. CH-T COL 0 - 7 1 Custom foreground color for the Channel-Time display71-I. BCK. CH-T COL 0 - 7 1 Custom background color for the Channel-Time display72-I. NOT USED73-I. CH NOT AVBLE 0 / 1 0 When set to 1 and channel override is 0, ÒNOT AVAILABLEÓ mwhen direct accessing a channel not in the favorite chann74-I. CH-TIME SIZE 0 / 1 0 When set to 1 and transparent background is selected for Chann(foreground color = background color and custom color enabled) a larnumber is displayed instead of the normal Channel-Tim75-I. NOT USED76-I. DEFEAT XDS 0 / 1 0 When set to 1, XDS display pr ogram information will n77-I. QUICK SHUTOFF 0 - 17 0 Allows TV timed power off press and hold setup with pillow speak78-I. UPN MSB 0 - 255 255 User programmable number, most significant byte79-I. UPN MSB-1 0 - 255 255 User programmable number, most significant byte - 1.80-I. UPN MSB-2 0 - 255 255 User programmable number, most significant byte - 2.81-I. UPN LSB 0 - 255 255 User programmable number, least significant byte82-I. CHKSM ERROR 0 / 1 0 Enforces rigid M.P.I. checksum83-I. HANDSHK TIME 0 - 5 0 Relaxes M.P.I. timing to be compatible with PC based Win dows con84-I. PERMANENT BLK 0 / 10 / 10 / 10 / 10 / 10 / 10 / 10000100Remove block hEnables soft mute when signal is not present.Enables poke function thru M.P.I. Commands.Disables front panel key.ours setting for Parental Control and make blocks perm85-I.86-I.87-I.88-I.89-I.90-I.NNEN NOISE MUTENOT USEDPOKE ENABLEKEY LOCKOOT UT USEDSEDtrol) menu.trol) menu.e display...essage is displayedel list.el-Time display,ge channele display.ot appear.er channel button...trolled systems.anent.Detailed Descriptions of Installer Menu Items0-I. INSTALLER SEQUENCEGives access to Installer Menu depending on thecode selected.0 = 9876 1 = 43212 = 1478 3 = 36981-I. POWER MANAGE (Power Management)Determines hours of no activity before automaticshutoff. The POWER MANAGE function is forsaving energy. When set to 0, Power Manage isOFF. Settings range from 0 - 7, with 1 - 7representing the hours that the TV will remain on,unless there has been activity from either thecontrol panel or remote control.2-I. AC ON (AC Power Switchable)Allows the TV to turn ON just by applying ACpower. Pressing the ON button is not necessary.This is desirable when the TV is plugged into acable box or a power outlet controlled by a wallswitch. Use ADJUST to select 0 or 1, where 0 isthe default is OFF, and 1 is ON.NOTE: When set to 1 (ON), the TV does notrespond to ON/OFF commands from either theremote or the control panel, and the SLEEPTIMER is also nonfunctional.3-I. BAND/AFC (Band/Automatic FrequencyControl)There are 8 possible settings for this option:0 = Broadcast Fixed 4 = Broadcast AFC5 = CATV Fixed 1 = CATV AFC6 = HRC Fixed 2 = HRC AFC7 = ICC Fixed 3 = ICC AFCChannels are accessed faster when fixed modesare used. The AFC (search modes) should only beused when some channels are not on nominalfrequencies.NOTE: BAND is automatically set by AUTOPROGRAM.