Zenith H20H52DT Installation And Operating Manual

Since the Clone Programmer’s time cannot be setdirectly, the time needs to be copied from a ZenithTV equipped with M.P.I. Input capability.Once the time is copied to the Clone programmer,the current time can then be transferred to anotherTV. (This can be a Master TV, or another TV whichhas had the features already set up.)D. Teach Master TV’s Setup to Other TVOnce Learning is complete, remove the M.P.I.cable from the master TV and connect it to the TVthat you want to copy the master TV’s setup to.With the “TV is Controlled by Clone” messagedisplayed, press 2 or use either Channel key to goto the “Teach to TV” option, press ON/OFF,POWER, or ENTER. Follow on-screen instructionsto transfer the Setup and other information to the“Learning” TV. After the “Teach to TV is Complete”message is displayed, press any key to return tothe Clone menus option, then press ON/OFF,POWER, or ENTER. If finished, remove M.P.I.Cable from the TV.E. Disconnect TV Power for 5 SecondsRemove the TV power cord of the newly “ClonedTV” from the power outlet for about 5 seconds toactivate the newly copiedSetup.C. Learn Setup from Master TVPress 1 to select the “Learn From TV” option,then press ON/OFF, POWER, or ENTER to go tothe Memory Bank Selection Menu.Pick the Memory ”Bank” (1, 2, 3, or 4) you wantto store this Master TV’s Setup in by pressingeither Channel key repeatedly to pick Memory 1,2, 3, or 4. (If you choose a Memory “Bank” thatalready has a master TV’s setup already in it, itwill be overwritten by this Master TV’s setup.)Once the Clone memory bank is selected, pressON/OFF, POWER, or ENTER. The Clonememory bank you have selected will be shown.Press ON/OFF or POWER to begin copying themaster TV’s setup.Ca. Set the Clock (Optional)Set the time on the Master TV’s Clock. (If thetime has already been copied from another TVinto the Clone programmer, you can set theMaster TV’s clock by copying the time from theClone programmer.)The Clone Programmer can copy the currenttime to both a master TV and to the Clone’sinternal clock; accurate to within one minute.(Another reason that the Clone programmershould be equipped with fresh, high-qualityalkaline batteries is for it to keep the time asaccurately as possible.)Clone Selection Menu ChoicesPage 42