Operating Guide 15Installation• Component Input portsTo get better picture quality, connect a DVD player to the compo-nent input ports as shown below.How to connectConnect the audio and video cables from the external equip-ment's output jacks to the TV input jacks, as shown in thefigure.When connecting the TV to external equipment, match thejack colors (Video = yellow, Audio Left = white, and AudioRight = red).How to use1. Select the input source with using the TV/VIDEO button onthe remote control. Note that this TV finds the connectedinput sources automatically for Video, Front Video andComponent 1-2. It is presumed that RGB and HDMI/DVIsources are connected.2. Operate the corresponding external equipment.Component portson the TV Y PB P RVideo output portson DVD playerYYYYPbB-YCbP BPrR-YCrP RHow to connect1. Connect the DVD video outputs (Y, P B, PR) to the COMPONENT (Y, PB , PR) INPUT jacks on the TV and connect the DVDaudio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputsto the AUDIO INPUT jacks on the TV, as shown in the figure.Note: If your DVD player does not have component video output, use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the TV/VIDEO button on the remote control to select Component 1 or Component 2. (If connected to S-VIDEO, selectthe Video or Front Video external input source.)3. Refer to the DVD player's manual for operating instructions.ExternalExternal A/V Source SetupA/V Source SetupDVD SetupDVD SetupAUDIORLVIDEOCOMPONENT INPUT 1RL(MONO)DVD/DTVINPUTCOMPONENT INPUT 2MONITOR OUTPUTA/V INPUTVIDEO AUDIO S-VIDEOR LAUDIO VIDEOAUDIORLVIDEOCOMPONENT INPUT 1RL(MONO)DVD/DTVINPUTCOMPONENT INPUT 2MONITOR OUTPUTA/V INPUTVIDEO AUDIO S-VIDEO(R) AUDIO (L)S-VIDEO B R(R) AUDIO (L)DIGITAL AUDIOOPTICALDVDorCamcorderVideo GameDevice