Zenith Z42PX1D Installation And Operating Manual

Also see for Z42PX1D: Installation and operating guide, warranty Installation and operating guide, warranty

Operating Guide 21InstallationHow to use1. Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET.2. Turn on the display by pressing the POWER button on the TV SET and HDMI/DVI Source Devices remote control.3. Select HDMI/DVI Input source in input source option of SETUP menu.(Refer to P.25)4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness inHDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source Devices to another resolution, change the refreshrate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics card cannot changed, change the PC graphics card or consult the manufacturer of the PC graphics card.Notes:- Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.- Avoid keeping a fixed image on the TV SET screen for a long period of time. The fixed image may become permanently imprint-ed on the screen. Use the Orbiter screen saver when possible.- When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit toScreen. As shown the lower picture, press the ADJUST button to adjust the screen Position of TV SET and contact an PCgraphics card service center.- When Source Devices connected HDMI/DVI Input output TV SET Resolution(480p, 720p, 1080i), TV SET Display fit EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center.- In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL" OSD display in HDMI/DVIInput. And In case of, Video Resolution not supported TV SET output in HDMI/DVI Source Devices, "INVALID FORMAT" OSDdisplay. Refer to the Manual of HDMI/DVI Source Devices or contact your service center.ClosePOSITION GGSIZEPHASERESETAdjustDDFF GGEEIn This Mode, the Supported TV SET Resolution Specification- 1920 x 1080 I @ 59.94Hz / 60Hz, 16:9- 1280 x 720 P @ 59.94Hz / 60Hz, 16:9(preferred format)- 720 x 480 P @ 59.94Hz / 60Hz, 16:9- 720 x 480 P @ 59.94Hz / 60Hz, 4:3In This Mode, the Supported PC Resolution Specification- 640 x 480 @ 60Hz- 640 x 480 @ 72Hz- 640 x 480 @ 75Hz- 800 x 600 @ 56Hz- 800 x 600 @ 60Hz- 800 x 600 @ 72Hz- 800 x 600 @ 75Hz- 1024 x 768 @ 60Hz(preferred format)- 1024 x 768 @ 70Hz- 1024 x 768 @ 75HzPC mode