Zenith Z42PX1D Installation And Operating Manual

Also see for Z42PX1D: Installation and operating guide, warranty Installation and operating guide, warranty

Operating Guide 25Operation- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.1. Press the MENU button and then use DD / EE button to select the SETUP menu.2. Press the GG button and then use DD / EE button to select Input Source.3. Press the GG button and then use DD / EE button to select the source: Antenna,Cable, Video, Front Video, Component1, Component2, RGB-DTV (or RGB-PC),HDMI/DVI.4. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Note:• To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and pressGGbutton.Input SourceInput Source1. Press the MENU button and then use DD / EE button to select the SETUP menu.2. Press the GG button and then use DD / EE button to select Input Label.3. Press the GG button and then use DD / EE button to select the source: Video, FrontVideo, Component1, Component2, RGB, HDMI/DVI.4. Press the FF / GG button to select the label.5. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Input LabelInput Label- Choose preset labels for your channels.- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel -even if you didn't preset a label for the channel.1. Press the MENU button and then use DD / EE button to select the SETUP menu.2. Press the GG button and then use DD / EE button to select Channel Label.3. Press the GG button. You will now see a screen filled with Labels and a preview screen.4. Use the CH DD/EE button to select a channel to Label.5. Use DD / EE / FF / GG button to select the appropriate label for the channel, then press ENTER button to set the Label tothe selected channel.- If you press ENTER button in TV viewing mode, you will see the channel banner. • For example:Channel Label SetupChannel Label Setup- Sets a label to each input source or lets you skip the input source which is notin use when you press TV/VIDEO button.