Zenith Z42PX1D Installation And Operating Manual

Also see for Z42PX1D: Installation and operating guide, warranty Installation and operating guide, warranty

24 Plasma TVOperation- There are two different ways in order to add or delete scanned channels. Oneis "Custom List" and the other is "Favorite List" in the channel list. Both of themare available after EZ Scan on the SETUP menu.- A Custom List can be created by toggling each channel on or off with ENTERbutton. The channels in the Custom List are displayed in black color, and thechannels deleted from the Custom List are displayed in gray color. Once achannel is highlighted you can add or delete the channel by referring to thesmall window at the top-left corner of the screen.You can create your ownFavorite List. Use the FAV button on the remote control when a channel ishighlighted and then you can add or delete the channel to/from the FavoriteList.1. Press the MENU button and then use DD / EE button to select the SETUP menu.2. Press the GG button and then use DD / EE button to select Channel Edit.3. Press the GG button. You will now see a screen filled with channel numbers anda preview picture.4. Use DD / EE / FF / GG button to select a channel and then use the ENTER button toadd or delete it. Press FAV button to add the channel to the Favorite List.5. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Channel EditChannel Edit- It indicates strength of the DTV signal whether you need to adjust your antenna or digital cable input.The higher the signal strength, the less likely you are to experience picture degradation.- DTV Signal: Only when the input signal is DTV or CADTV, this function is available.DTV Signal StrengthDTV Signal Strength1. Press the MENU button and then use DD / EE button to select the SETUP menu.2. Press the GG button and then use DD / EE button to select DTV Signal.3. View the on-screen signal strength monitor to see the quality of the signal beingreceived.4. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Setup Menu OptionsSetup Menu Options