Zenith Z42PX1D Installation And Operating Manual

Also see for Z42PX1D: Installation and operating guide, warranty Installation and operating guide, warranty

Operating Guide 23Operation- Automatically finds all available channels through antenna or cable inputs, and stores them in memory on the channel list.- Run EZ Scan again after any Antenna/Cable connection changes.- A password is required to gain access to EZ Scan menu if the Lock System is turned on.1. Press the MENU button and then use DD / EE button to select the SETUP menu.2. Press the GG button and then use DD / EE button to select EZ Scan.3. Press the ENTER button to begin the channel search.Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.EZ Scan (Channel Search)EZ Scan (Channel Search)1. Press the MENU button and then use DD / EE button to select the SETUP menu.2. Press the GG button and then use DD / EE button to select Manual Scan.3. Press the GG button and then use DD / EE button to select TV, DTV, CATV, andCADTV.4. Press the GG button and then use DD / EE button to select channel number youwant to add or delete.5. Press the ENTER button to add or delete for the channel number.6. Press EXIT button to return to TV viewing or press MENU button to return tothe previous menu.Manual ScanManual ScanNotes:• This channel number is a physical channel number, which is different from the normal channel number shown in ChannelEdit.• TV: analog antenna(over-the-air) TV signalDTV: digital antenna(over-the-air) TV signalCATV: analog cable TV signalCADTV: digital cable TV signalSetup Menu OptionsSetup Menu Options- A password is required to gain access to Manual Scan menu if the Lock System is turned on.