Connecting to devices with Bluetooth wireless technology :: 61Sending an application over a Bluetooth wireless connection1. Go to Applications .2. Open the menus .3. Select Send on the App menu.4. Select the Send From pick list and select whether the application you want to sendis located on your Treo or on an expansion card.5. Select the application you want to transfer. It cannot have a lock next to it.6. Select Send.7. Select Bluetooth, and then select OK.8. Select the receiving device on the Discovery Results screen, and then select OK.Receiving information over a Bluetooth wireless connection1. Go to Applications and select Bluetooth .2. Select Bluetooth On.3. If you already have a trusted pair with the other device, your Treo is ready to receivethe info. If you don’t have a trusted pair with the other device, select theDiscoverable pick list and select Yes.4. When the Send dialog box appears, select a category or expansion card. If youdon’t select a category, the item goes in the Unfiled category.5. Press Up to receive the information, or press Down to refuse it.You can set your Treo toreceive Bluetooth wirelessconnections when yourphone is off. However, keepin mind that the Bluetoothradio consumes batterypower even though yourphone is off.1. Go to Applications andselect Bluetooth.2. Select Bluetooth On.3. Open the Options menuand select Do not allowwakeup. This toggles thesetting to Allow wakeup.Check your battery levelbefore establishing aBluetooth wirelessconnection. If the batterylevel is low, you can’t makea Bluetooth wirelessconnection.
