TECAN 3. Installation Procedure2006-03 Instructions for Use for sunrise Absorbance Reader No. 30008746 Rev. No. 1.4 3-53.8.2 Starting the “Sunrise Instrument Settings”In case an instrument is already connected to one of Tecan's programs, close theprogram or disconnect the instrument.The “Sunrise Instrument Settings” software is started by clicking the “SunriseInstrument Settings” icon on the desktop if present or go to Start – Programs –Tecan – and select “Sunrise Instrument Settings”.The following dialog box appears:In the “Sunrise Instrument Settings” dialog box, select the communication portand the baud rate. Click Next.3.8.3 Define Instrument ModeThe following dialog box appears:To use an instrument with software designed for previously manufactured Tecanreaders, select the appropriate instrument mode and baud rate. Click Next.sunrise mode It is recommended to use the sunrise mode with 9600 baudSpectra mode Simulates a SPECTRA ReaderRainbow mode Simulates a Rainbow ReaderATC mode Simulates an ATC Reader
