4. The sunrise Touchscreen TECAN4-4 Instructions for Use for sunrise Absorbance Reader No. 30008746 Rev. No. 1.4 2006-034.4.2 Data HandlingThe illustration below shows the concept of data handling of the instrument.The standard storage memory for onboard operation is the USB stick. The USBstick offers a capacity of >= 32 MB to save results and defined methods.Depending on the size of the files, up to 1000 files can be stored permanently onthe USB stick. Additional USB sticks can be ordered for memory extension. But atthe same time there should never be more than one USB stick in use with theinstrument to prevent mismatches. Data can be transferred to a PC by pluggingthe USB stick into a PC.Additionally, the sunrise can be connected to the personal computer (PC) andby-pass the onboard software (serial RS232 interface).Please NoteOnly from Tecan approved USB sticks may be used. Otherwise dataleakage may be possible.Printer USB interfaceUSB stick(data exchange)Service interfacePrinter interface (parallel port)(only available with touchscreen option)PRINTERCOMPUTERSerial RS232 interface(remote control)
