tecan sunrise Instructions For Use Manual
Also see for sunrise: Instructions for useOperating manual
                                                                                    | |
Contents
| 
TECAN 5. Error Messages and Trouble Shooting2006-03 Instructions for Use for sunrise Absorbance Reader No. 30008746 Rev. No. 1.4 5-55.1.3 Table of Error Messages and Trouble Shooting forTouchscreenError Messages Description Trouble ShootingUSB stick ErrorsUSB stick is notaccessibleNo USB stick plugged in Plug-in USB stick and wait 15 sec beforecontinue operation.Write protection activated Unplug USB stick. Unlock the write protection.Plug-in USB stick and wait 15 sec beforecontinuing operation.USB stick is defect Use a PC to format a new USB stick. Createthe folders ‘mth’ and copy the neededmethods from the backup directory into thisdirectory. Create the folder ‘wsp’ and do thesame for needed workspaces. At theTouchscreen replace the defect USB stickwith the new one and wait 15 sec. Retry!‘No storage mediumfound! Storing willnot be possible untilyou connect theUSB stick!’No USB stick plugged in See above!Could not createworkspace directory:\USB-Disk\…!’Please note: ‘Error!Unable to write onUSB stick. Pleasemake sure the USBstick is connectedand not writeprotected.’No USB stick plugged inWrite protection activatedSee above!‘\USB-Disk\…contains an invalidpath.’No USB stick plugged in See above!‘Access to \USB-Disk\… was denied.’Write protection activated See above!‘Warning! Thestorage medium isrunning out of diskspace.’There is not enough space onthe USB stick to save newdata.Save currently not needed data from theUSB stick to a PC backup directory. Deletethen the saved files on the USB stick to gainmore storage space. Retry saving.‘An unknown erroroccurred whileaccessing...’Write protection activated ordeactivated during plugged inUSB stick.Restart the instrument.Note: Unplug USB stick to lock/unlock thewrite protectionThe method defined, mostlykinetics, needs too muchprogram memory so it isimpossible to save.Cancel the saving and redefine the method(e.g. reduce number of cycles and/ortransformations/calculations).Undefined status after havingplugged in the USB stick.Plug-in the USB stick and wait 15 sec beforecontinuing operation. |
Related manuals for tecan sunrise
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine