ABB DCS880 series manuals
DCS880 series
Table of contents
- DCS880 Drive Manuals
- Table Of Contents
- Table Of Contents
- Table Of Contents
- What this chapter contains
- Installation and maintenance work
- Grounding
- Printed circuit boards and fiber optic cables
- Operation
- Chapter overview
- Type code
- Plus codes
- Main circuit and control
- Before installation
- Terminal options for converter modules size H1 ... H4
- Terminal cover according to VBG 4 regulations
- Semiconductor fuses (F1)
- Semiconductor fuses (F1) and fuse holders for armature circuit
- Auxiliary transformer (T2) for electronic system / fan supply
- EMC filters (E1)
- Converters size H1 ... H4 configuration using an OnBoard field exciter
- Cooling fans
- Monitoring the DCS880 power section
- Cross-sectional areas - Tightening torques
- Selecting the control cables
- Connection of a motor temperature sensor to the drive I/O
- IT (ungrounded) systems
- Location F-type options and interfaces
- Pulse encoder connection
- Pulse encoder connection principles
- Connecting the signal and control cables
- Installation checklist
- Current ratings - IEC regenerative
- Current ratings - IEC non regenerative
- Control circuit terminals on the SDCS-CON-H01
- Control circuit terminal layout
- XAI: Reference voltages and analog inputs
- RO1, RO2, RO3: Relay outputs
- XDIO: Digital inputs / outputs
- XSMC: Mains contactor
- Additional terminals
- Ground isolation diagram
- Jumpers and switches
- Interface board SDCS-PIN-H01
- Technical data
- Armature circuit interface
- Circuit diagram
- Fuses and fuse holders IEC
- Line reactors IEC
- Auxiliary transformer (T2) for converter electronics and fans
- Other cables
DCS880 series
Table of contents
- Table Of Contents
- DCS880 Drive manuals
- Ratings, types and voltages
- Unpacking and mechanical installation
- Type code and plus codes
- Brief instructions for virtual CD and documents overview
- Notes on EMC
- Start, Stop and E-Stop control
- Planning the electrical installation, size H1 5
- Terminal locations of the converter
- Control circuit terminal layout
- Notes For North American Installations
- DCS880 control panel
- Drive composer PC tool
- Parameter groups
- Safety instructions, drives commisioning
- Autotuning warning AF90
- Environmental conditions
- User macros
- Drive logic and main control word
- Fieldbus control
- Overview control (Drive composer printout)
- Declarations
- DCS Family
DCS880 series
Table of contents
- DCS880 Drive manuals
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- What this chapter contains
- Installation and maintenance work
- Grounding
- Printed circuit boards and fiber optic cables
- Operation
- Chapter overview
- Type code
- Plus codes
- Main circuit and control
- Armature converter DCS880 H5
- Armature converter DCS880 H6
- Armature converter DCS880 H7 and H8
- Unpacking and examining the delivery (H1 ... H3)
- Unpacking and examining the delivery (H4)
- Unpacking and examining the delivery (H5)
- Unpacking and examining the delivery (H6)
- Unpacking and examining the delivery (H7, H8)
- Delivery check
- Installing the drive (H1 ... H3)
- Installing the drive (H4, H5)
- Installing the drive (H6 ... H8)
- Terminal options for converter modules size H1 ... H4
- Mounting the converter module H5 inside an enclosure
- Mounting the H7 power unit inside an enclosure
- Mounting the H8 power unit inside an enclosure
- Semiconductor fuses (F1)
- Semiconductor fuses (F1) and fuse holders for armature circuit
- Fuses (F3.x) and fuse holders for field circuit
- Single-phase autotransformer (T3) for field circuit (adapt voltage)
- Line reactors for single- and 3-phase connection of field converters
- EMC filters (E1)
- Converters size H1 ... H4 configuration using an OnBoard field exciter
- Converters size H5 configuration using FEX-425-Int field exciter
- Converters size H6 configuration using a FEX-425-Int field exciter
- Converters size H1 ... H6 configuration using external field exciters DCF803, DCF804
- Converters size H7 and H8 configuration using external field exciters DCF803, DCF804
- Converters size H1 ... H3 as large field exciter
- Start, Stop and E-Stop control
- Cooling fans
- Fan connection for DCS880 (H1 ... H4)
- Fan connection for DCS880 (H5 ... H8)
- Monitoring the DCS880 power section
- Cross-sectional areas - Tightening torques
- Selecting the power cables
- Connection of a motor temperature sensor to the drive I/O
- IT (ungrounded) systems
- Location F-type adapters and interfaces
- FEA-03 I/O extension adapter configuration
- Pulse encoder connection
- Pulse encoder connection principles
- Connecting the signal and control cables
- DCSLink wiring
- Connecting a control unit at H7 and H8 power units
- Installation checklist
- Current ratings - IEC regenerative converters (S02)
- Current ratings - IEC non regenerative converters (S01)
- Control board SDCS-CON-H01 (H1 ... H8)
- Intermediate cover
- Control circuit terminal layout
- XAI: Reference voltages and analog inputs
- RO1, RO2, RO3: Relay outputs
- XDIO: Digital inputs / outputs
- XSMC: Mains contactor
- Replacing the memory unit
- Ground isolation diagram
- Jumpers and switches
- DDCS Interface configuration
- DDCS branching unit NDBU-95
- DCSLink board SDCS-DSL-H1x (H1 ... H8)
- Daisy chain DPI-H01 kit (H1 ... H8)
- Power Interface board SDCS-PIN-H01 (H1 ... H5)
- Technical data
- Power supply board SDCS-POW-H01 (H6 ... H8)
- Field circuit interfaces SDCS-BAB-F01 and SDCS-BAB-F02 (H1 ... H4)
- Measuring board SDCS-PIN-H51 (H6 ... H8)
- Firing pulse transformer board SDCS-PIN-H41 (H6 ... H8)
- Optical power link board SDCS-OPL-H01 (H7, H8)
- Location of the SDCS-OPL-H01
- Connection between firing and control board for H6 ... H8
- Galvanic isolation - T90, A92, F11, F90
- DC-DC transducer A92 (1)
- Transformer T90
- Size H8 lefthand (+P906)
- Size H8 righthand (+P906)
- Branch fuses installed inside converter sizes H5 ... H8
- DCF803-0016, FEX-425-Int and DCF803-0035
- Electrical data
- DCSLink communication
- RS232-Port
- DCF803-0016 and DCF803-0035 configuration (H1 ... H8)
- Dimensions
- FEX-425-Int configuration (H5)
- FEX-425-Int configuration (H6)
- DCF803-0050, DCF804-0050, DCF803-0060 and DCF804-0060
- Control unit
- Diagnostics
- DCF803-0050 / 0060 and DCF804-0050 / 0060 configuration (e.g. 2 motors)
- DCF505 / DCF506 Overvoltage Protection
- Fuses and fuse holders IEC
- Line reactors IEC
- Autotransformer (T3)
- Line reactor (L3)
- Auxiliary transformer (T2) for converter electronics and fans
- Supply transformer (T8) for cooling fans
- Optical cables
- Other cables
Related products
ACS880 SeriesDCS550 SeriesACS880-01 SeriesACS880 P940 SeriesACS880 P944 SeriesACS880-07XT Series580 SeriesDMP SeriesACS880-01+C135 SeriesACS880-31SeriesABB categories
Industrial Equipment
DC Drives
Controller
Relays
Measuring Instruments
Circuit breakers
Battery Charger
Industrial Electrical
Transformer
Switch
manualsdatabase
Your AI-powered manual search engine