2gig Technologies Go!Control 2GIG-CNTRL2 User Manual

Also see for GO!control 2GIG-CNTRL2: Installation & programming instructions Operation and user's guide

Contents

2gig Technologies Go!Control 2GIG-CNTRL2 User Manual Manual pdf 4 page image

2System OverviewGeneral InformationThis system provides three forms of protection: burglary, fire, and emergency,depending on the options set by the installer. The system consists of theControl Panel with a color touch screen, wireless sensors that provideperimeter and interior burglary protection, and wireless smoke and carbonmonoxide detectors. In addition, optional remote control key fobs, wirelesspanic pendants, and wireless keypads may have been provided or installed.The system monitors all protection “zones” and the system’s status. It willdisplay monitoring information and control the alarm siren. Your system mayalso have been setup to send alarm and status reports to a Central MonitoringStation and has the capability for 2-way voice communications with the alarmmonitoring operator.FeaturesFollowing is a list of standard features and options that can be included inyour system. Ask your installer which options are available to you and checkthe boxes that apply.✓ STAY and AWAY arming modes. Stay Mode arms the system perimeter only andis used typically at night when the premises are occupied. Away Mode arms thesystem perimeter and interior; it’s used when the premises are unoccupied.✓ 32 user-unique 4-digit codes to operate the system. The system supports one“Master User Code” that can assign and maintain the other User Codes.✓ One of the 32 User Codes functions as a Duress User Code. Controlling the systemwith this code gives the appearance of normal operation, but using it secretly sends a“duress” report to the Central Monitoring Station to initiate a silent alarm call for help.✓ Voice announcements from the Control Panel. The system has a large vocabularyof descriptive words that can be assigned to sensors so each will have a uniqueannouncement such as “front door” or “baby’s room window” if desired.✓ Home automation with the built-in Z-Wave controller for remotecontrolling Z-Wave enabled home appliances (optional feature).✓ Alarm history with system event log. Each alarm and system alert is loggedinto the system’s memory. These events can be displayed and reviewed atthe Control Panel or remotely by the Central Monitoring Station.✓ Real time clock and calendar shows on the system’s displayand is used to time stamp items in the event log.❑ 2-way voice communication. After an alarm, the system can automatically connectwith a Central Station operator so they can converse with people in the premises.❑ Remote control of the system over the telephone.❑ Remote control of the system using a Web-enabled device throughthe Internet (requires GSM cellular radio option).❑ Three optional 24-hour emergency functions: PANIC, FIRE, and EMERGENCY.These functions can be activated by buttons on the Control Panel, using wirelesssensors, from the wireless keypad, or from portable pendant devices.