2gig Technologies Go!Control 2GIG-CNTRL2 User Manual

Also see for GO!control 2GIG-CNTRL2: Installation & programming instructions Operation and user's guide

Contents

2gig Technologies Go!Control 2GIG-CNTRL2 User Manual Manual pdf 46 page image

44Key Fob Disarm After Alarm SoundThe system can be set so when it’s disarmed with a wireless key fob after an alarm has occurred,a special series of beeps will sound through the internal and external sounders. This option servesas an alert to warn you to approach the premises with caution as an intruder may still be present.KEY FOB DISARM AFTER ALARM SOUND❑ OFF (regular setting) ❑ ON★ IMPORTANT: If you return to the premises and hear the special beeps when disarming with the key fob, USECAUTION! The special beeps indicate that an alarm has occurred while you were gone. AN INTRUDER MAYSTILL BE ON THE PREMISES. LEAVE IMMEDIATELY AND CONTACT THE POLICE FROM A SAFE LOCATION.Key Fob OptionsThe installer selects which options are enabled for each key fob (1-8) used with the system. Refer tothe table below for the options selected for your key fobs:KEY FOB GENERAL OPTIONSOption Fob #1 Fob #2 Fob #3 Fob #4 Fob #5 Fob #6 Fob #7 Fob #8Arm without Exit DelayAllow key fob disarmingEnable key fob auxiliary keyKEY FOB EMERGENCY (AWAY & DISARM PRESSED) OPTIONS (Check one per fob)Option Fob #1 Fob #2 Fob #3 Fob #4 Fob #5 Fob #6 Fob #7 Fob #8Auxiliary AlarmAudible AlarmSilent Panic AlarmFire AlarmEmergency Keys DisabledKEY FOB ARMING BYPASS OPTIONSOption All Key FobsAuto-bypass all open perimeter sensors and un-bypass a sensorif closed while the system is armedAuto-bypass open perimeter sensors permanently while armedAllow key fob arming only when all perimeter sensors are closedWireless Keypad Emergency KeysEach standard wireless keypad has FIRE and POLICE emergency buttons that can be enabled ordisabled for each keypad. Refer to the table below for options set for your keypads:STANDARD WIRELESS KEYPAD EMERGENCY KEYSOption Keypad #1 Keypad #2 Keypad #3 Keypad #4Emergency Keys EnabledEmergency Keys DisabledExit Delay RestartThe Exit Delay Restart option will extend the Exit Delay one time if you need to re-enter the premises.When the system is armed in the Away Mode or Stay Mode, the Exit Delay gives you time to leavewithout setting off the alarm. With the Exit Delay Restart option, re-entering the premises after youhave left, but before the Exit Delay timer expires, will restart the Exit Delay timer, giving you thefull length of time to leave again. The restart option only works once, each time the system is armed.EXIT DELAY RESTART❑ ON (regular setting) ❑ OFFInstaller Set Options