INTERNAL MODEM INSTALLATION WITH WINDOWS 95241. Turn off your computer and unplug it fromthe electrical outlet.2. Unplug any peripheral devices (printer,monitor, keyboard, mouse, etc.) from thecomputer.TIP: Before you unplug any cords,label them or make a sketch of howthey are connected. This can be helpfulwhen you plug them back in later.CAUTION : To avoid risk ofelectric shock, make sure your computerand all peripheral devices are turned offand unplugged from electrical outlets.3. Remove the screws from your computer’scover and then remove the cover, as shownin the following diagrams. Your computermay differ in appearance from thesediagrams, but the basic principle forremoving the cover should be the same.Refer to your computer manufacturer’smanual if you need further instructions.
