Windows 95/98 Setup 415 Select The updated driver (Recommended) and thenclick Next.Windows again requests that you verify that you want toinstall the displayed driver, as shown in Figure 21.Figure 21 Add New Hardware Wizard Screen (5)6 Click Next.Windows 98 copies the required files to your hard diskand builds the driver information database.The 3Com Installation Wizard starts. Go to Chapter 3.Disabling Plug and Play on the NICIf your Windows 95/98 PC does not support Plug and Play,you must disable Plug and Play on the NIC before you caninstall the NIC software.Follow these steps to disable Plug and Play on the NIC:1 After installing the NIC in the PC, turn the power onand boot Windows 95/98.2 Insert EtherDisk diskette 2 in drive A.
