Installing NetWare Drivers for DOS, Windows 3.1,and Windows for Workgroups837 When the Intelligent Auto Install process is finished,remove EtherDisk diskette 2 from drive A and rebootthe PC.If you are running Windows 3.1x, after you connect tothe NetWare server, run the WSINSTALL program for fullWindows support. Contact your system administratorfor the location of this NetWare utility.If problems occur only when using the Intelligent AutoInstall program, display or print the COMSLINK.LOG file tosee a list of all events occurring during the Intelligent AutoInstall installation and configuration process. To display the file, enter:type comslink.log | more To print the file, enter:print comslink.logTo install the network drivers for Windows 3.1x,Windows for Workgroups, or DOS in a non-NetWareenvironment, see the appropriate text files in theHELP directory on EtherDisk diskette 2.Obtaining NetWare Loadable ModulesYou can obtain current NetWare Loadable Modules (NLMs)for the NetWare servers listed in Table 5 from the Novell Website, www.support.novell.com.The 3C509B NIC no longer supports NetWare 3.11and 4.0x servers.Table 5 NetWare NLMsNetWare Server NLM NameNetWare 3.12 ETHERTSM.NLMNBI31X.NLMMSM31X.NLMNetWare 4.11, 4.1 ETHERTSM.NLMNBI.NLMMSM.NLM
