98 C HAPTER 6: T ROUBLESHOOTING FOR W INDOWS 95/98 AND W INDOWS NTRunning TestsTwo tests help you troubleshoot problems with the NIC: NIC test Network testNIC TestRun the NIC test to determine that the NIC is workingcorrectly. Be sure to run this test after you have verified thatthe network is functioning.Follow these steps to run the NIC test:1 Click Run NIC Test to begin the test.A progress bar appears. Results are displayed when the testis completed.2 Click OK.Network TestRun the Network test first if you are experiencing problemswith the NIC. This tests the ability of the 3C509B NIC totransmit and receive data while connected to the network.Follow these steps to run the Network test:1 Click Run Network Test.The Network Connectivity Test screen is displayed.2 Click Start to begin the test.The PC on the network acting as the receiver in this testis identified on the right side of the screen. Results aredisplayed when the test is completed.To run the test continuously, select the Continuouscheck box.3 Click Close.Uninstalling the NICIf you have problems installing NIC software, allow the3Com Installation Wizard to finish. The installation cannotbe canceled once it is started.CAUTION: Before attempting to reinstall 3Com NICinstallation software, you must first perform theuninstallation process.
