12 C HAPTER 2: I NSERTING AND C ONNECTING THE C ARDFigure 9 Disconnecting Cables from the CardRemoving the LAN+Modem CardTo remove the card, reverse the installation procedure. Onmost systems, you do not have to power down the computerbefore removing the card. See “Hot Swapping,” below.Some card slots have buttons or levers for ejecting the card.Check your computer manual for information on removingcards. Store the card in its original or similar packaging.Hot SwappingIf you are using the point enabler, you cannot hotswapthe LAN+Modem card. If you are using Card and SocketServices or Windows 95, you can remove the LAN+Modemcard without turning the computer off.CAUTION: Do not remove the modem when a datatransmission is taking place. Exit your communicationsapplication before removing the card.
