2-8 CHAPTER 2: I NSTALLATIONFigure 2-3 Printer Port CablingFor pin assignments of the printer port, refer to Appendix A, “PinAssignments.”Attaching the PowerCableA power cable is supplied with your CS/2500 series server. If the powercable does not match your requirements, contact your network supplierfor assistance.To attach the power cable, follow these steps:1 Make sure that the AC power switch is in the O or off position.2 Attach the power cable to the receptacle on the back panel.3 Plug the other end of the power cable into an AC power source.Install server in rackCS/26003ComInstall bracketsCS2500BookFile : Installation Page 8 Thursday, December 11, 1997 10:44 AM
