5-8 CHAPTER 5: MAINTENANCE AND UPGRADESFigure 5-5 Memory Chip and EPROM Locations on MotherboardReplacing the DisketteDriveThis section explains how to replace the diskette drive (Model CS/2600only).You need a #1 and a #2 Phillips screwdriver. A pair of needlenose pliersis also helpful for removing and replacing screws and connectors.Follow this procedure:1 Make sure server power is off and the power cord is unplugged.2 Remove the cover, as described in “Removing the Cover” on page 5-6.3 Perform the steps illustrated in Figure 5-6.a Disconnect the ribbon cables from the side of the daughtercardmounted on top of the diskette drive bracket (step 1 in Figure 5-6).Note the orientation of the cables.EPROMsMemory chips (RAM)0-78-FRearFrontCS2500BookFile : MaintenanceUpgrades Page 8 Thursday, December 11, 1997 10:44 AM
