vi2 INSTALLATIONPreparation 2-1Mounting the Server 2-2Mounting on a Table 2-2Mounting in a Rack 2-2Mounting on the Wall 2-4Cabling the Server to the Network 2-4Cabling Hosts, Terminals, and Modems 2-4Attaching RS-232 and RS-422 Serial Cables 2-5Cabling a Console 2-5Attaching a Transceiver Cable 2-7Attaching a Printer Cable 2-7Attaching the Power Cable 2-8Modifying the Firmware Configuration 2-93 STARTUPBooting from the Network 3-1Installing Software on an RBCS Server 3-1Installing Software on a Generic TFTP/FTP Host 3-2Booting from an RBCS Server 3-2Booting from a Generic TFTP/FTP Host 3-3Remote Reboot 3-3Booting from Diskette 3-3Copying and Formatting Diskettes 3-3Formatting Diskettes without the Copy Command 3-6Booting the Communications Server 3-6Normal Startup Messages 3-7Boot Problems 3-8Shutting Down 3-84 CONFIGURATIONEntering the Firmware Monitor 4-1Changing the Configuration 4-3Console Baud Rate 4-6Console Port 4-6Continuous Self-Test 4-6CS2500BookFile : CS2500BookFileTOC Page vi Thursday, December 11, 1997 10:44 AM
