1-2 CHAPTER 1: INTRODUCTION3C689 Adapter FeaturesThe 3C689 adapter ships with an unshielded twisted-pair(UTP) cable and a shielded twisted-pair (STP) connector.The 3C689 adapter features include:n Automatic adapter configuration.n Compliance with IEEE 802.5 standards.n 100% IBM‚ compatibility (uses IBM-designed chip set).n Compliance with PCMCIA Release 2.01 standard, Type II formfactor.n Integrated Card Services support (also works withoutCard Services).n “Hot Swap” support (you can remove and reinsert theadapter without rebooting the computer).The TokenDisk‚ diskette is supplied with the adapter. Itincludes the AutoLink‰ automatic installation program, theConfiguration and Diagnostic Program, DOS and OS/2 drivers,and driver agents for Transcend PC Link SmartAgent software.3C689 Adapter RequirementsBefore you can install the adapter successfully, you mustmeet the following requirements:n Your computer must have the PCMCIA Release 2.01, 16-bitType II or Type III card slot and a 3 1/2-inch diskette drive.n Your computer must be running DOS 3.1 or higher.n Your computer must have an 80286 or higher processor.n You must be physically connected to a UTP orSTP network port.
