2-6 CHAPTER 2: INSTALLING THE 3C689 ADAPTEROnce you have inserted and connected the 3C689 adapter tothe network, you are ready to configure the adapter. Toconfigure the 3C689 adapter, go to Chapter 3 if you are on aDOS-based Novell‚ NetWare‚ network. If you are runningany other network operating system, go to Chapter 4.Removing the AdapterThe adapter can be removed whether the power to thecomputer is ON or OFF.Be sure to log off the network before you remove the3C689 adapter.Follow these steps to remove the adapter:1 Disconnect the connecting cable from the network.2 Slide the latch on the PC Card connector back todisconnect the connecting cable from the 3C689 adapter.Do not use the cable to pull the adapter out of the slot.3 Remove the adapter from your computer.You can remove and reinsert the adapter without rebootingthe computer.4 Store the adapter card in its original or similar packaging.
