|
Installing the NDIS 2.01 Driver 5-9Substitute the actual DOS PROTOCOL driver name, ifappropriate, for PROTOCOLDRIVER.DOS.This completes the NDIS driver installation sample procedure.Using the 3C689 Adapter with Windows for WorkgroupsThe TokenDisk diskette contains a subdirectory structure andfiles that make it an OEM import disk for Microsoft Windowsfor Workgroups (WFW). Run the configuration portion of theConfiguration and Diagnostic Program before you start thisprocedure.To import the driver during installation of Windows forWorkgroups, follow these steps:1 Insert Microsoft’s Setup disk 1 in the diskette drive andmake that drive the active drive. For example, type:A: [Enter]2 Execute the WFW setup program. Type:setup [Enter]3 Follow the instructions on the screen.4 When prompted, enter the target drive and directorywhere WFW is to be installed. For example, type:C:\WINDOWS5 From the Network setup dialog box, select the Networks...box.6 Select Install Microsoft Windows Network and the button.7 From the Network window select the Drivers... box.8 In the Network Adapters dialog box, select the button.
|
