3Com PC CARD ADAPTER User Manual
                                                                            | |
Contents
| 
Using Auto Configuration 4-32 Use a text editor to edit the CONFIG.SYS file on yourcomputer.3 Exclude the memory range that the 3C689 adapter isusing. For example, type this line into the device sectionof the new CONFIG.SYS file:device=c:\windows\emm386.exe x=CC000-D3FFFnoemswhere x stands for exclude, followed by the memory rangethat the adapter is using.Refer to the manual that accompanied the memory managersoftware for additional instructions and information.4 Save the CONFIG.SYS file and exit the text editor.5 Reboot the computer.This completes the procedure for avoiding conflicts with amemory manager. You are now ready to configure the adapter.Using Auto ConfigurationThe Auto Configure the 3Com PC Card Adapter option on themain menu configures the adapter. To perform the autoconfiguration procedure, follow these steps:1 Place the TokenDisk diskette in a floppy drive on yourcomputer and make that drive the active drive. Forexample, type:A: [Enter]2 Type at the prompt:INSTALL [Enter]3 The first time you use the TokenDisk diskette, the 3Comsoftware license box appears. To continue with theprogram you must enter Y for Yes.The AutoLink information screen appears. Press [Enter] tocontinue. The main menu appears. |
Related manuals for 3Com 3C689
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine