Changing Configuration Settings 4-5Changing Configuration SettingsTo manually change the configuration settings, followthese steps:If you have loaded Card and Socket Services, you will not be ableto change Interrupt Request Level, MMIO Base Address, andCIS Memory as Card Services manages these values for you.1 Select the Configuration/Diagnostic/Troubleshootingoption on the main menu, shown in Figure 4-2.Press [Enter].2 On the Configuration and Diagnostic menu, selectConfiguration and Diagnostic Program.A screen identifying the adapter appears.3 The menu item Configure Adapter appears alreadyhighlighted. Press [Enter].The configuration information for the selected adapterappears on a screen similar to that shown in Figure 4-3.The I/O Base Address parameter is automatically highlighted.Figure 4-3 Adapter Configuration ScreenConfiguration and Diagnostic ProgramInstallQuit View SelectAdapter ConfigurationF1=Help[ENTER]=Change the Setting[≠Ø]=Scroll[Alt]= Key>=Execute FunctionTestCancelOKModify File OptionsTokenLink III Adapter ConfigurationI/O Base AddressInterrupt Request LevelRing SpeedMMIO Base AddressShared RAM Address Range(Primary)316 MbpsCC000hD0000h - DBFFFh
