Installing the NDIS 2.01 Driver 5-1117 Immediately following the line DRIVERNAME=TLPC3$,include the text from the PROTOCOL.PCM file.For example, if you are using Card Services, the statementsshould look similar to the following:[TLPC3]DRIVERNAME=TLPC3$RINGSPEED=16Or, if you are not using Card Services, the statements shouldlook similar to the following:[TLPC3]DRIVERNAME=TLPC3$PRIMARYINTERRUPT=3MMIO=0XCC00RAM=0XD000RAMSIZE=16RINGSPEED=1618 Save the file and exit.This completes the procedure that imports the driver duringinstallation of Windows for Workgroups.Using IBM LAN Support Program DriversYou can install IBM LAN Support Program (LSP) drivers withthe 3C689 adapter. IBM's LSP drivers do not have anyembedded support to initialize PC Card adapters.3Com provides an enabler program that works with theprotocol manager to initialize the PC Card adapter. You mustload the enabler program and protocol manager beforeloading the IBM LSP drivers. The LANSUP subdirectory of theTokenDisk diskette contains the enabler program(LSPEN.3CM), the protocol manager (PROTMAN.DOS), andinstallation instructions (LANSUP.TXT).
