3Com VCX Connect Installation And Configuration Manual

Also see for VCX: Quick reference guide Guide Guide Guide

Contents

3Com VCX Connect Installation And Configuration Manual Manual pdf 13 page image

Configuration Overview 13CAUTION: Mixtures of server types are not supported.The single primary server configuration can be updated later to include asecondary server. The server being added must be the same as theoriginal (primary) server. For example, you cannot add a VCX Connect200 server as a secondary server to a VCX Connect 100 primary server.ConfigurationOverviewAll VCX Connect servers arrive from the factory configured with default IPaddresses. To adapt the servers to your environment, you must:■ Reconfigure the network attributes of the servers■ Modify some of the default configuration parameters of the servers■ Install license key files to support more than the 25 telephone usersand 25 voice mailboxes provided by the factory default license.GatheringConfigurationInformationMany parameters are preconfigured on VCX Connect servers in ordermake installation and configuration easier. Some of these parametersmust be modified in order to accommodate the servers to your network.When you run the vcx-config-network or the vcx-reconfigure scriptto modify the network and other parameters of the servers, you will needthe information in Table 1:Table 1 Server ParametersParameter Default Value New ValueIP Address Primary Server: 192.168.1.190Secondary Server: 192.168.1.192You must choose IP addresses that are compatible with thenetwork segment on which you plan to install the servers.Network Mask 255.255.255.0 Modify this mask if the network segement on which youplan to install the servers requires a different mask.NOTE: Configuration of the parameters in Table 1 are described in Chapter 2, “VCX™ Connect Server Installation”.Table 2 Media Gateway ParametersParameter Default Value ChangesIP Addresses of MediaGateways in a VCXConnect 100 ServerPrimary VCX Connect 100 Server Gateway:192.168.1.200Secondary VCX Connect 100 Server Gateway:192.168.1.202You must choose IP addresses that arecompatible with the network segmenton which you plan to install the VCXConnect servers.