3Com VCX Connect Installation And Configuration Manual

Also see for VCX: Quick reference guide Guide Guide Guide

Contents

3Com VCX Connect Installation And Configuration Manual Manual pdf 15 page image

Obtaining a License 15■ Alternatively, use the ssh (secure shell) UNIX/Linux command toconnect to the server. This command is available on most UNIX- orLinux-based systems. If you are using a Microsoft Windows PC youcan install the Cygwin tools. Cygwin provides a Linux-like environmentfor Microsoft Windows.For information on how to download and install the Cygwin tools on yourWindows PC, access this URL: http://www.cygwin.com/The PuTTY, Tera Term Pro, and ssh connection methods can also be usedto perform any reconfiguration after the network configuration has beenperformed on the servers and they are connected to the network.Obtaining a License VCX Connect 100 and VCX Connect 200 servers come from the factorywith pre-installed licenses that support:■ 25 telephones■ 25 voice mailboxesTo support additional telephones or voice mailboxes, you must purchaseadditional telephone and/or voice mailbox licenses. The instructions onhow to obtain additional licenses can be found in the VCX InstallationGuide. Refer to the License Key topic in Chapter 1.CAUTION: License keys are installed on both the primary and secondaryservers. If you have installed a primary server only and later you want toadd a secondary server, the secondary server license capacity must matchthe parameters of the primary server license key (the same number oftelephones, voice mailboxes, and so on). If the license key on thesecondary server does not match and the primary becomes unavailablefor any reason, system operation switches to the secondary server but theTable 3 Terminal Emulation Program ParametersVCX Connect 100 Server VCX Connect 200 ServerVT100 emulation mode VT100 emulation mode115,200 Baud 9,600 Baud8 data bits 8 data bits1 stop bit 1 stop bitNo parity No ParityNo flow control No flow control