Hunt Groups 83Hunt Group calls routed to a call coverage point always go to the pointconfigured for the Hunt Group, not to the point configured for (or by) theHunt Group member (that is, the member’s personal call coverage point).If the member has Do Not Disturb enabled, personal (non-Hunt Group)calls go to the call coverage point. However, Hunt Group calls always ringon a member’s phone, regardless of the Do Not Disturb setting.If your telephone is part of a bridged extension, see Hunt Groups andBridged Line Calls for additional information.Logging In to a HuntGroupWhen your administrator gives you your hunt group membershipinformation, you can log in to your hunt group (or groups if you havebeen assigned membership in multiple groups). You must be logged in toa hunt group to receive calls for that group.You must be logged in to your VCX system account before you can log into a hunt group. If you are not logged in to the VCX system, whichrequires password authentication, you cannot log in to a hunt group. Seethe overview section for your telephone in this guide.You log in to a hunt group by entering feature code followed by huntgroup number. If you are already logged in, entering the same featurecode and hunt group number logs you out. You can also log in to and logout of a hunt group through the VCX User Interface (see Viewing HuntGroup Membership and Status).To log in to a hunt group using a feature code:1 Press Feature + 971.The Display Panel shows a prompt requesting a hunt group number.2 Enter the hunt group number, then press #.The Display Panel indicates that your hunt group login status haschanged.Alternatively, you can combine steps 1 and 2 by entering the followingsingle command:*971*You can display all the hunt groups you are currently logged in to bypressing Feature + 972 (see Viewing Hunt Group Membership andStatus).
