3D Systems ProJet x60 Series User Manual
                                                                        | |
Contents
| 
ProJet® x60 Series User Guide ProJet x60 Series Overview3dscentral.3dsystems.com 4 All Rights Reserved5/12/131.3 Computer/System Requirements1.3.1 Software• 3DPrint™ 1.0 or later1.3.2 Recommended SystemComputer operating systems and hardware change frequently. Please check out the latest recommenda-tions on our 3DS Central Web site, in the Support section: 3dscentral.3dsystems.com.1.4 How the 3D Printing System WorksThe ProJet ® ColorJet™ Printing System is based on the Massachusetts Institute of Technology's patented3DP ® Technology (3D Printing). This 3D Printing process involves:• Importing a solid 3D modeling file into the 3DPrint Software• Setting up your files to print in the 3DPrint Software• Printing the part• Drying the part, emptying the build bed, and removal of excess PXL Core material• Cleaning and servicing the printer• (Optional) Applying post-processing materials to the printed partTo start, the 3DPrint Software takes a three-dimensional design file, (3DPrint is compatible with most 3Dmodeling software files) and converts it into cross-sections, or layers, that are between 0.0035" - 0.004"(0.089 - 0.102 mm) thick. Before printing, 3DPrint evaluates the part geometry and checks if there areenough materials in the printer to print the number of layers required to build the part. If there are, theprinter then prints each layer, one after the other, from the bottom of the part to the top. If not, 3DPrint willprompt you to add Core, to add binder, or to change a print head before it will start the print job.Print Head All models:• HP11 clearProJet 260C/460Plus:• HP57 tricolorLiquid Waste System Disposable absorbent waste tray - no liquid to spill |
Related manuals for 3D Systems ProJet 126C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine