3D Systems ProJet x60 Series User Manual
                                                                        | |
Contents
| 
ProJet® x60Pro Series User Guide Setup And Print The Build3dscentral.3dsystems.com 17 All Rights Reserved5/12/132 Setup And Print The BuildThis section will briefly introduce you to using 3DPrint to get your part ready to build. Then it will show youhow to get your ProJet x60 ready and actually print your part. For all the details on using 3DPrint, refer tothe 3DPrint User Manual.2.1 Install 3DPrintIf 3DPrint has not been installed, you will first need to install it. Installation instructions are available in the3DPrint User Manual. Be sure to install the software on the same computer that is connected to your 3DPrinter. Also be sure you use the version of 3DPrint that came with your ProJet x60 system.If you encounter any problems during installation, please contact your local Service Provider or Reseller, orvisit the Support section of our Web site at 3dscentral.3dsystems.com.2.2 Open A Part In 3D Print1. Launch the 3DPrint Software.2. In the Open dialog, select a file to print, or browse to a file on your computer. Click the Open button, ordouble click on a file to open it in 3D Print.2.2.1 3DPrint Main WindowAfter the file is opened, the part will be displayed on the 3DPrint Main Window. Here it will be shown in a3D View on the right, and 2-D views on the left showing a top view and a side view. See the 3DPrint UserManual for a complete description of the Main Window and its features and toolbars.2.2.2 Part Orientation, Strength, and Printing SpeedHow the part is oriented in the build volume will have an effect on the strength of the part before infiltration.Orientation - and placement (location) on the build platform - will also impact the speed at which the buildcompletes.For details on placing and orienting your part using 3DPrint, refer to the 3DPrint User Manual. |
Related manuals for 3D Systems ProJet 126C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine