ProJet® x60 Series User Guide Printer Maintenance3dscentral.3dsystems.com 45 All Rights Reserved5/12/136.5 Clean The Spreader RollerFrequency: On a regular schedule, depending on your usage. Or, whenever the printer has problemsrelated to the surface finish of horizontal surfaces.1. On the LCD, select BUILD CHAMBER then LOWER PLATFORM. Lower the build bed by 4-5 inches.2. Move the Fast Axis out over the build bed.3. On the LCD, select BUILD CHAMBER then CONTROL ROLLER.4. On the LCD, select ROLLER ON/OFF to turn the Spreader Roller on.5. Using a paper towel dampened with distilled water, clean the Spreader Roller thoroughly by reachingup from underneath.6. Dry the roller thoroughly with a clean dry paper towel.7. On the LCD, select ROLLER ON/OFF to turn the Spreader Roller off.8. When finished, select EXIT (ROLLER OFF) to return to the Main Menu.9. Make sure the roller is completely dry before attempting to spread any Core.Number Component1 Spreader Roller
