3D Systems ProJet x60 Series User Manual
                                                                        | |
Contents
| 
ProJet® x60Pro Series User Guide Setup And Print The Build3dscentral.3dsystems.com 18 All Rights Reserved5/12/132.3 Check The Default SettingsBefore you start your build, check the settings for the printer.2.3.1 Printer Settings1. Select Settings > Printer Settings to display the Printer Settings dialog.2. In the Printer Settings dialog, check that the default printer is the printer that is connected to yourcomputer.3. If you need to make a change, click on Select Printer.4. In the Select 3D Printer dialog, choose Network as the Port Type. Click the Find button to locate theprinter on the network. If the printer is connected to the network, it will appear on the list. Select theprinter and click OK.5. The Default Printer Settings dialog reopens showing your new default settings. To save your set-tings, click the Save As Default button. You can change these settings at any time by repeating Steps1 - 4.2.4 Check The Build SettingsBefore printing, always check your build settings.1. Select Settings > Materials.2. Check that the printer listed in the Select Printer field is the printer connected with the computer run-ning 3D Print, and that the printer is Online.3. Print in Monochrome instructs the printer to ignore any color information contained in your 3D modeland print a completely white, monochrome part. (ProJet 260C and 460Plus only)4. Click OK.2.5 Prepare the Build AreaGo to your printer and check each item listed below to ensure the printer is ready to print. It is important tocheck each of these items before every build.• Check that the Deck, Fast Axis, and Build Bed are clean of any loose Core material. See Section3.1, ’Vacuum Excess Core Material’ for instructions on how to vacuum up excess Core fromthese areas.• Check that the Debris separator is empty. See Section 3.2, ’Empty The Debris Separator’ forinstructions on how to empty the Debris separator.• Check that Carriage and Rails are clean. See Section 3.3, ’Clean The Fast Axis Rails and Car-riage’ for instructions on how to clean the Carriage and Rails.• Check that Service Station is clean. See Section 3.4, ’Clean The Service Station’ for instructionson how to clean the Service Station.• Check that the platform is raised to the top of the Build Bed. Select PREP BUILD CHAMBER >CONTINUE on the LCD menu to raise the platform to its proper position. |
Related manuals for 3D Systems ProJet 126C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine