3M X20 Product Safety Manual

Also see for 78-9236-6922-6 - Digital Projector X20 XGA LCD: Operator's guide

3M X20 Product Safety Manual Manual pdf 11 page image

3M™ Multimedia Projector X20 Product Safety Guide© 3M 2006 11ENGLISH• To reduce the risk associated with exposure to hazardous voltage:- Disconnect power cord when the projector is not in use, during lamp replacement,and while cleaning.- 'RQRWUHPRYHDQ\VFUHZVRWKHUWKDQWKRVHVSHFL¿HGLQWKHODPSUHSODFHPHQWLQVWUXFWLRQV- Do not attempt to service the projector - there are no user serviceable parts, otherthan the lamp cartridge, inside the projector. Contact a 3M authorized serviceprovider for service.• To reduce the risk associated with hot surface of lamp cartridge:- Unplug the projector from the electrical outlet and allow the lamp to cool for 45minutes before replacing the lamp.• To reduce the risk associated with a ruptured lamp:- Always handle the fragile lamp module with care.- Remove the projector from the ceiling or wall mount before replacing the lamp. Inthe case of a lamp rupture, small glass particles could fall out when the lamp dooris opened or the projector is tilted.- Use care when replacing the lamp module in the event of a lamp rupture - smallglass particles and small amounts of mercury may be present.- Ventilate the area where the lamp rupture occurred.- Wear safety goggles and gloves when cleaning up ruptured lamp debris.- Carefully collect the ruptured lamp debris in a closed container and dispose of the containerand the expired lamp module in accordance with federal, state, and local regulations.- Wash your hands thoroughly after handling ruptured lamp debris.- Replace the lamp module when the lamp replacement message appears.- Never replace the lamp module with a previously used lamp module.• To reduce the risk associated with environmental contamination due tomercury in the projection lamp:- Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.- The lamp in this product contains mercury. Dispose of projection lamp in a mannerthat is consistent with your local hazardous waste regulations for mercury.- For recycling and disposal information, contact your respective governmentalagencies.In U.S., contact the Electronic Industries Alliance at www.lamprecycle.orgIn Canada, contact 1-800-362-3577 (3M Canada)WARNINGThe glass lamp used in this projector contains small amounts of mercury and operates athigh pressure and at high temperature and may unexpectedly shatter. Each lamp has adifferent lifetime and can fail in different ways, including a rupture with a loud bang orsimply burn out. In the event of a lamp rupture, be sure to follow the instructions.Replacing LampImportant Note:,IWKHODPSEUHDNVVRRQDIWHUWKH¿UVWWLPHLWLVXVHGLWLVSRVVLEOHWKDWWKHUHDUHHOHFWULFDOSUREOHPVelsewhere besides the lamp. If this happens, contact your local dealer or a service representative.