Chapter 2. CLI Syntax Reference31 3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.2show verThis command will show the CLI and API version.Example://localhost> show verCLI Version = 2.00.03.0xxAPI Version = 2.01.00.xxIn the above example, “xx” stands for the actual version. See the ReleaseNotes for details.show verifyThis command displays all verify schedules for the 9000 series controllers inthe system. The output shown will be either the advanced or the basic verifyschedule, depending upon which is enabled for each controller. Basic verify isonly supported on the 9650SE and 9690SA controllers running 9.5.1 or later.Example:This example shows two controllers, one with an advanced verify scheduleand one with a basic verify schedule.//localhost> show verifyVerify Schedule for Controller /c2========================================================Slot Day Hour Duration AdvVerify--------------------------------------------------------1 Sun 12:00am 24 hr(s) on2 Mon 12:00am 24 hr(s) on3 Wed 4:00pm 24 hr(s) on4 Wed 12:00am 24 hr(s) on5 Thu 12:00am 24 hr(s) on6 Fri 12:00am 24 hr(s) on7 Sat 12:00am 24 hr(s) on/c3 basic verify weekly preferred start: Saturday, 12:00AMFor additional information about verify schedules, see “/cx addverify=ddd:hh:duration” on page 67, “/cx set verify=basic [pref=ddd:hh]” onpage 74, and see the discussion of background tasks and schedules in 3wareSAS/SATA RAID Software User Guide, Version 9.5.1.
