Controller Object Commandswww.3ware.com 44Example://localhost> /c2 show memory/c2 Available Memory = 448MB/cx show modelThis command reports the controller model of controller /cx.Example://localhost> /c0 show model/c0 Model = 9690SA-8E/cx show monitorThis command reports the monitor (firmware boot-loader) version ofcontroller /cx.Example://localhost> /c0 show monitor/c0 Monitor Version = BLDR 2.xcx show numdrivesThis command reports the number of drives currently managed by thespecified controller /cx. This report does not include (logically) removed orexported drives.On 9500S and earlier controllers, physically-removed disk(s) will still becounted. For a workaround, see “/cx/px show smart” on page 109.Example://localhost> /c0 show numdrives/c0 Number of Drives = 5/cx show numportsThis command reports how many physical connections are made to thecontroller and the total number of physical ports possible for the controller.Example for a 9650SE-16ML with no drives attached://localhost> /c0 show numports/c0 Number of Ports = 16Example for 9690SA-8E with 8 dual-port SAS drives://localhost> /c3 show numports/c3 Connections = 16 of 128
