160 Parameters12.30 AI2 scaled at AI2maxDefines the real value that corresponds to the minimumanalog input AI2 value defined by parameter 12.28 AI2 max.See the drawing at parameter of 12.29 AI2 scaled at AI2 min.50.000-32768.000…32767.000Real value corresponding to maximum AI2 value. 1 = 112.101 AI1 percent value Value of analog input AI1 in percent of AI1 scaling (12.18 AI1max - 12.17 AI1 min).-0.00… 100.00% AI1 value 100 = 1%12.102 AI2 percent value Value of analog input AI2 in percent of AI2 scaling (12.28 AI2max - 12.27 AI2 min).-0.00… 100.00% AI2 value 100 = 1%1313 Standard AO Configuration of standard analog outputs.13.02 AO force selection The source signals of the analog outputs can be overriddenfor eg. testing purposes. A forced value parameter is providedfor each analog output, and its value is applied whenever thecorresponding bit in this parameter is 1.Note: Boot and power cycle reset the force selections(parameters 13.02 and 13.11).0000h0000h…FFFFh Forced values selector for analog outputs AO1 and AO2. 1 = 113.11 AO1 actual value Displays the value of AO1 in mA.This parameter is read-only.-0.000…22.000 mA Value of AO1. 1 = 1 mA13.12 AO1 source Selects a signal to be connected to analog output AO1. OutputfrequencyZero None. 0Motor speed used 01.01 Motor speed used (page 139). 1Output frequency 01.06 Output frequency (page 139). 3Motor current 01.07 Motor current (page 139). 4Motor current % ofmotor nominal01.08 Motor current % of motor nom (page 139). 5Motor torque 01.10 Motor torque (page 139). 6DC voltage 01.11 DC voltage (page 139). 7Output power 01.14 Output power (page 140). 8Speed ref ramp in 23.01 Speed ref ramp input (page 200). 10Speed ref ramp out 23.02 Speed ref ramp output (page 200). 11Speed ref used 24.01 Used speed reference (page 204). 12Freq ref used 28.02 Frequency ref ramp output (page 213). 14Process PID out 40.01 Process PID output actual (page 261). 16No. Name/Value Description Def/FbEq16Bit Value0 1 = Force AO1 to value of parameter 13.13 AO1 forced value.1 1 = Force AO2 to value of parameter 13.23 AO2 forced value.2…7 Reserved
